INTERDISCIPLINARY GENERAL ENGINEER/ARCHITECT with Security Clearance
Dutieso You will monitor construction activity to ensure compliance with contract plans, specifications, and scheduling.
o You will review construction project parameters (e.
g.
, integration, scope, time, cost, quality, communication, procurement, risk management) to recommend changes that will improve the overall project results.
o You will develop project budgets to ensure conformance with project and customer requirements.
o You will negotiate design modifications with representatives to verify operational agreements satisfy the interests of facilities programs and projects.
o You will participate in discussions with contractor representatives on matters of safety, installations regulations, utility outage coordination, progress of work, or needs of the tenant with respect to work under constructionRequirements Conditions of Employmento Must be a US Citizen.
o Must be determined suitable for federal employment.
o Must participate in the direct deposit pay program.
o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.
govo Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
o Males born after 12-31-59 must be registered for Selective Service.
o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
o You will be required to obtain and maintain a current valid United States driver's license.
o This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA)Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
o You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
o You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
o Work may be performed in areas where potentially harmful physical and chemical agents are present (e.
gfumes, dust, heat, ionizing and non-ionizing radiation and chemicals)You will be required to participate in medical surveillance programsQualifications In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties:
1) Identifying the need for a modification to scope, cost, and/or schedule based upon collaboration with the contractor, supported command, designer, or other entities; 2) Enforcing all technical and administrative provisions of assigned construction contracts; 3) Providing technical solutions for unforeseen problems during construction; 4) Managing construction projects in support of clients with critical, time-sensitive missions and requirements; and 5) Ensuring communication between construction manager, contract specialists, the contractor, the project technical team, the client, and others as appropriate for construction projectsNOTE:
This information must be supported in your resume to be considered for the positionAdditional qualification information can be found from the following Office of Personnel Management website:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.
pdf https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation For the GS-0801, Professional General Engineering Series, applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.
nspe.
org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
http:
//www.
nspe.
org/Licensure/HowtoGetLicensed/index.
htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g.
, in interdisciplinary positionsFor the GS-0808, Professional Architecture Series applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a bachelor's or higher degree in architecture.
ORSuccessful completion of bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following:
structural technology, properties of materials and methods of construction, and environmental control systemsOR Successful completion of a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildingsMy curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR I lack a degree in architecture, but I have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that I have acquired a thorough knowledge of the fundamental principles and theories of professional architecture(Note - In the absence of college courses, 5 years of such experience is required)Additional information This announcement uses the Certain Personnel of the DoD direct hire authority to recruit and appoint qualified candidates to positions in the competitive serviceThis position is covered by the Department Recommended Skills Administration Construction Construction Management Contract Management Economy Electronics Apply to this job.
Think you're the perfect candidate? Apply on company site Estimated Salary: $20 to $28 per hour based on qualifications.
o You will review construction project parameters (e.
g.
, integration, scope, time, cost, quality, communication, procurement, risk management) to recommend changes that will improve the overall project results.
o You will develop project budgets to ensure conformance with project and customer requirements.
o You will negotiate design modifications with representatives to verify operational agreements satisfy the interests of facilities programs and projects.
o You will participate in discussions with contractor representatives on matters of safety, installations regulations, utility outage coordination, progress of work, or needs of the tenant with respect to work under constructionRequirements Conditions of Employmento Must be a US Citizen.
o Must be determined suitable for federal employment.
o Must participate in the direct deposit pay program.
o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.
govo Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
o Males born after 12-31-59 must be registered for Selective Service.
o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
o You will be required to obtain and maintain a current valid United States driver's license.
o This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA)Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
o You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
o You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
o Work may be performed in areas where potentially harmful physical and chemical agents are present (e.
gfumes, dust, heat, ionizing and non-ionizing radiation and chemicals)You will be required to participate in medical surveillance programsQualifications In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties:
1) Identifying the need for a modification to scope, cost, and/or schedule based upon collaboration with the contractor, supported command, designer, or other entities; 2) Enforcing all technical and administrative provisions of assigned construction contracts; 3) Providing technical solutions for unforeseen problems during construction; 4) Managing construction projects in support of clients with critical, time-sensitive missions and requirements; and 5) Ensuring communication between construction manager, contract specialists, the contractor, the project technical team, the client, and others as appropriate for construction projectsNOTE:
This information must be supported in your resume to be considered for the positionAdditional qualification information can be found from the following Office of Personnel Management website:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.
pdf https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation For the GS-0801, Professional General Engineering Series, applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.
nspe.
org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
http:
//www.
nspe.
org/Licensure/HowtoGetLicensed/index.
htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g.
, in interdisciplinary positionsFor the GS-0808, Professional Architecture Series applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a bachelor's or higher degree in architecture.
ORSuccessful completion of bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following:
structural technology, properties of materials and methods of construction, and environmental control systemsOR Successful completion of a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildingsMy curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR I lack a degree in architecture, but I have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that I have acquired a thorough knowledge of the fundamental principles and theories of professional architecture(Note - In the absence of college courses, 5 years of such experience is required)Additional information This announcement uses the Certain Personnel of the DoD direct hire authority to recruit and appoint qualified candidates to positions in the competitive serviceThis position is covered by the Department Recommended Skills Administration Construction Construction Management Contract Management Economy Electronics Apply to this job.
Think you're the perfect candidate? Apply on company site Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
