TECHNICAL PROJECT MANAGER with Security Clearance
Summary This position is part of the Warfare Centers Personnel Demonstration ProjectThe ND-4 pay band encompasses positions equivalent to GS-12 and GS-13; the ND-5 pay band encompasses positions equivalent to GS-14 and GS-15You will serve as a Technical Project Manager (TPM) for PMS 404 Torpedo Systems Safety Program in the Program Management Office of the Ranges, Engineering, and Analysis Department (Code 70) of the Naval Undersea Warfare Center Division NewportDutieso You will negotiate System Safety Tasking with the Program Office.o You will develop and provide inputs to the System Safety Management Plan (SSMP).o You will frequently travel to the Washington Navy Yard to meet with PMS 404 to brief the status of the program.o You will perform a variety of tasks involving the research, design and development of complex state-of-the-art naval equipment and systems, providing technical support to a team of system safety engineers.o You will be responsible for planning, execution, schedule, budgeting, and performance of all project aspects at Division Newport and ensuring senior leadership is kept apprised of technical risks and issues.o You will work in close coordination with the Test and Evaluation Services and Marine Environmental Customer Advocate (CA) to negotiate taskingwith the program office and to develop long and short-range plans.o You will establish and control technical milestones and adapt plans to meet evolving sponsor or programmatic needs in support of the CA.o You will will work with Division and Branch Heads to develop task statements, cost estimates, and ultimately to staff the tasksRequirements Conditions of Employmento Must be a US Citizen.o Must be determined suitable for federal employment.o Must participate in the direct deposit pay program.o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.govo Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.o Males born after 12-31-59 must be registered for Selective Service.o You will be required to obtain and maintain an interim and/or final Secret security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.o This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA)Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.o The 1550 series is a Cyberspace Workforce position, work role code 801 (Program Manager) at the Intermediate proficiency levelYou will be required to obtain and maintain qualifications in DoD Cyber Workforce and Department of Navy policies.o This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sitesYou must be able to travel on military and commercial aircraft for extended periods of time.o You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.o This is a bargaining unit positionQualifications This is an interdisciplinary position and may be filled by a Mechanical Engineer (0830-series), a Computer Engineer (0854-series), an Electronics Engineer (0855-series), a Mathematician (1520-series), or a Computer Scientist (1550-series) depending upon the qualifications of the candidateApplicants in positions with occupational series other than those listed (0830, 0854, 0855, 1520 and 1550) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualificationsTO QUALIFY FOR ND-5:
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-4 pay band (GS-12 and GS-13 equivalency) in the Federal service or equivalent experience in the private or public sectorSpecialized experience must demonstrate the following:
As a professional engineer or scientist leading the execution or direction of projects, systems development efforts, research, or technology initiatives for undersea warfare systemsTO QUALIFY FOR ND-4:
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-3 pay band (GS-9 through GS-11 equivalency) in the Federal service or equivalent experience in the private or public sectorSpecialized experience must demonstrate the following:
As a professional engineer or scientist applying systems engineering principles to design or develop undersea warfare systemsAdditional qualification information can be found from the following Office of Personnel Management website:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series Individual Occupational Requirements (IOR):
All Professional Engineering Positions, 08XXMathematics Series, 1520Computer Science Series, 1550 Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants must meet at least one of the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Professional Engineering Series (08XX) - Degree:
A professional engineering degree from an ABET-accredited college or university; OR a degree with curriculum in differential and integral calculus, with additional courses in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics; OR Professional Engineering Series (08XX) - Substitution of Education/
Experience:
A combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering; and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineeringThe adequacy of such background must be demonstrated by one of the following:
(a) professional registration, (b) evidence of successfully passing the Engineer-in-Training (EIT) examination; (c) successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified above; or (d) successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering provided that it included at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance(Note to Applicants:
Please see the Qualifications & Education sections of this announcement for a link to the Office of Personnel Management (OPM) Individual Occupational RequirementsOPM guidance indicates that there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experienceThis training plan or experience must be well documented and provided at time of application.); OR 1520-Mathematics Series:
A degree in mathematics; or a combination of education and experience - courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), plus appropriate experience or additional educationThe total coursework described above must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite; OR 1550-Computer Science Series:
A degree in computer science; or a degree with at least 30 semester hours in a combination of mathematics, statistics, and computer scienceAt least 15 of these 30 semester hours must have been in a combination of statistics and mathematics that included differential and integral calculusAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf ICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qual Recommended Skills Architecture Electronics Engineering Physics Finance Financial Management Heat Transfer Apply to this job. Think you're the perfect candidate? Apply on company site $(document).ready( function() $(#ads-desktop-placeholder).html(
n
n
n Estimated Salary: $20 to $28 per hour based on qualifications.
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-4 pay band (GS-12 and GS-13 equivalency) in the Federal service or equivalent experience in the private or public sectorSpecialized experience must demonstrate the following:
As a professional engineer or scientist leading the execution or direction of projects, systems development efforts, research, or technology initiatives for undersea warfare systemsTO QUALIFY FOR ND-4:
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-3 pay band (GS-9 through GS-11 equivalency) in the Federal service or equivalent experience in the private or public sectorSpecialized experience must demonstrate the following:
As a professional engineer or scientist applying systems engineering principles to design or develop undersea warfare systemsAdditional qualification information can be found from the following Office of Personnel Management website:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series Individual Occupational Requirements (IOR):
All Professional Engineering Positions, 08XXMathematics Series, 1520Computer Science Series, 1550 Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants must meet at least one of the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Professional Engineering Series (08XX) - Degree:
A professional engineering degree from an ABET-accredited college or university; OR a degree with curriculum in differential and integral calculus, with additional courses in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics; OR Professional Engineering Series (08XX) - Substitution of Education/
Experience:
A combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering; and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineeringThe adequacy of such background must be demonstrated by one of the following:
(a) professional registration, (b) evidence of successfully passing the Engineer-in-Training (EIT) examination; (c) successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified above; or (d) successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering provided that it included at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance(Note to Applicants:
Please see the Qualifications & Education sections of this announcement for a link to the Office of Personnel Management (OPM) Individual Occupational RequirementsOPM guidance indicates that there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experienceThis training plan or experience must be well documented and provided at time of application.); OR 1520-Mathematics Series:
A degree in mathematics; or a combination of education and experience - courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), plus appropriate experience or additional educationThe total coursework described above must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite; OR 1550-Computer Science Series:
A degree in computer science; or a degree with at least 30 semester hours in a combination of mathematics, statistics, and computer scienceAt least 15 of these 30 semester hours must have been in a combination of statistics and mathematics that included differential and integral calculusAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf ICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qual Recommended Skills Architecture Electronics Engineering Physics Finance Financial Management Heat Transfer Apply to this job. Think you're the perfect candidate? Apply on company site $(document).ready( function() $(#ads-desktop-placeholder).html(
n
n
n Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
